OT Asset Inventory: Why It Is Critical to Industrial Cybersecurity in 2026

Techpapers

Do you know exactly which devices are connected to your industrial network, what information they exchange and how your infrastructure changes over time?

An OT asset inventory makes it possible to identify, classify and keep up-to-date information on the devices in an industrial network: PLCs, HMIs, SCADA systems, engineering workstations, servers, sensors and other connected equipment. When it includes information on protocols, activity and communications, it becomes an essential tool for visibility and industrial risk management.

With the Greinfort Device Inventory functionality, organisations can automate asset discovery, understand their technical characteristics and visualise how they relate to one another within the OT infrastructure, without disrupting production processes.

NIST reinforces the importance of OT asset inventory in 2026

Industrial asset management has taken on a new prominence in international cybersecurity recommendations.

In June 2026, the National Institute of Standards and Technology (NIST) published the initial draft of the project Asset Management as a Foundation for Operational Technology Cybersecurity, led by its National Cybersecurity Center of Excellence (NCCoE).

This initiative seeks to demonstrate practical approaches to improving industrial device discovery, inventory management, configuration control and change tracking throughout the asset lifecycle.

NIST identifies several common challenges in industrial organisations: legacy systems, protocol diversity, operational constraints, distributed infrastructures and difficulties in maintaining complete inventories.

The project, currently under development, starts from a fundamental premise: without sufficient knowledge of OT assets, it is harder to assess risks, manage vulnerabilities, segment networks and respond to incidents.

This view is in line with the international guide Foundations for OT Cybersecurity: Asset Inventory Guidance for Owners and Operators, published by CISA and other cybersecurity agencies in August 2025.

Both initiatives reinforce the need to move from static inventories towards continuous discovery and management of industrial assets.

Why is a traditional inventory not enough for an industrial network?

OT infrastructures have characteristics that make it difficult to keep a complete record of devices.

A single plant may host controllers from different generations, SCADA systems, HMI interfaces, network equipment, wireless devices and legacy assets that have been running for years.

In addition, maintenance work, production line expansions or temporary supplier connections can introduce changes that are not always reflected in the documentation.

A manual inventory can show which equipment should be connected, but not necessarily which is actually present or how it is communicating. This difference matters from a security standpoint.

For example, an engineering workstation may establish new connections with several PLCs during maintenance work. Without visibility of devices and their communications, it is harder to determine whether that activity corresponds to a planned operation.

An effective OT inventory must provide up-to-date information on assets and enough context to interpret their activity on the network.

What information should an industrial device inventory include?

For an OT inventory to be useful for cybersecurity tasks, it must go beyond identifying IP addresses.

The most relevant technical information includes:

  • Asset identification: IP address, MAC address, manufacturer and device type.
  • Technical characteristics: operating system, firmware version and other available attributes.
  • Services and connectivity: open ports, services and communication protocols.
  • Industrial context: device classification, Purdue level and relationships with other assets.
  • Activity: first detection and last activity dates, and changes observed in the infrastructure.

The information available will depend on the device, the traffic observed and the discovery mechanisms used.

How does Greinfort carry out OT asset inventory?

Greinfort automatically discovers and classifies devices connected to the industrial infrastructure, gathering technical and contextual information on each asset.

Its inventory functionality makes it possible to consult data such as IP, MAC, manufacturer, firmware, operating system, ports, services, industrial protocols and Purdue level.

The information can also be supplemented with editable properties and custom fields to make assets easier to organise and consult. In this way, the functionality turns the inventory into an up-to-date source of information on the OT infrastructure, reducing dependence on purely manual records.

Discover all the capabilities of the Greinfort Device Inventory.

Passive OT device discovery: visibility without disrupting production

One of the main difficulties in industrial asset discovery is obtaining information without compromising system availability.

Unlike many IT environments, certain OT devices can be sensitive to unexpected queries, intensive scans or identification techniques that are not compatible with their protocols.

For this reason, passive OT asset discovery is a particularly suitable approach for industrial environments.

This technique analyses the communications travelling across the network to identify devices and extract information on their characteristics and relationships, without needing to query them directly.

Its main advantage is that it provides visibility without introducing scanning traffic towards the monitored equipment.

However, its scope depends on the observation points and the traffic available. A device that does not communicate during the period analysed may not be detected.

Passive monitoring and Smart View in Greinfort

Greinfort uses passive, non-intrusive monitoring to discover industrial assets and analyse their communications.

It also includes Smart View, an optional and configurable active scanning capability that extends the information available on certain devices by identifying open ports and active services.

Smart View can be disabled at plant or device level, so its use can be adapted to the operational constraints of each environment. This combination offers a flexible approach to industrial asset discovery: passive visibility as the foundation, with complementary mechanisms when operating conditions allow.

From inventory to topology: how to visualise OT communications

Identifying a device is the first step. Understanding which other equipment it communicates with makes it easier to interpret its role within the infrastructure.

For example, a PLC may routinely exchange information with a SCADA system, an HMI and an engineering workstation. If a new communication appears towards an unknown device, the team in charge needs to determine its origin and assess whether it corresponds to an authorised operation.

An inventory that includes communications information makes it possible to put this kind of situation into context.

Greinfort’s dynamic network map

Greinfort complements the inventory with a dynamic network map that visually represents the connections and relationships between industrial devices.

This functionality makes it possible to explore the communications observed, understand the network topology and see how the infrastructure evolves.

It also includes a representation by Purdue levels, useful for placing assets in the context of the industrial architecture.

The result is a view that goes beyond a list of equipment: it shows which devices exist and how they interact with one another. This information can support the review of unexpected communications, the identification of changes and the understanding of dependencies between systems.

How can WiFi and Bluetooth devices be identified in an industrial plant?

OT infrastructure is not made up solely of devices connected via wired networks.

Industrial environments may also contain mobile maintenance equipment, wireless sensors, WiFi devices and systems that use Bluetooth.

These devices may fall outside the scope of an inventory based solely on wired network traffic. To extend visibility, Greinfort includes Air Watcher, a functionality that identifies WiFi and Bluetooth devices present in the vicinity of its sensors.

Air Watcher provides information on the wireless equipment observed, its identifiers, activity and detection dates.

This makes it easier to know about the presence of wireless devices that may not be documented and to check them against the organisation’s connectivity policies. Detecting a wireless device does not necessarily mean it is connected to the OT network, but it provides additional information about the environment that is worth monitoring.

OT asset inventory, NIS2 and IEC 62443: from visibility to risk management

Asset management is a key component of the main industrial cybersecurity frameworks.

The ISA/IEC 62443 series sets out principles and requirements for the protection of industrial automation and control systems.

Its zones and conduits approach requires an understanding of the architecture, the assets that make it up and the communications between different segments.

Having an up-to-date inventory and information on the relationships between devices makes it easier to analyse the infrastructure and review its segmentation.

The NIS2 Directive, for its part, establishes cybersecurity risk management measures for the entities within its scope.

Although the scope and specific obligations depend on each organisation, knowing and documenting assets is an important basis for assessing risks, managing vulnerabilities and preparing evidence.

An OT inventory does not in itself guarantee regulatory compliance, but it provides the information needed to develop and maintain security controls. In Greinfort, the inventory can complement other platform capabilities, such as vulnerability management and OT security monitoring, as well as the regulatory compliance functionalities.

What are the advantages of an automated OT asset inventory?

An automated, up-to-date inventory can help industrial organisations to:

  1. Reduce blind spots: identify devices that do not appear in existing records.
  2. Improve traceability: know the technical characteristics and activity of assets.
  3. Detect changes: identify new connections and modifications to the infrastructure.
  4. Understand communications: visualise relationships between PLCs, HMIs, SCADA and other systems.
  5. Support vulnerability management: have information on manufacturers, devices and identified versions.
  6. Facilitate audits: maintain technical information that can be used as documentary evidence.

These benefits are especially relevant in complex infrastructures, where maintaining the inventory purely by hand can be difficult.

Greinfort: discover which devices really make up your industrial network

OT asset inventory is no longer a purely documentary task.

NIST and CISA recommendations reinforce the need to know industrial devices, keep information up to date and understand the relationships between assets in order to improve risk management.

With its Device Inventory functionality, Greinfort addresses these challenges through three complementary capabilities:

  • Automated inventory: discovery, identification and technical characterisation of industrial assets.
  • Dynamic network map: visualisation of connections, communications and relationships between devices.
  • Air Watcher: identification of WiFi and Bluetooth devices present in the industrial environment.

All with a passive monitoring approach designed to preserve operational continuity.

Are you sure you know every device connected to your plant?

An undocumented piece of equipment, a new connection or an unknown wireless device can reveal relevant information about the real state of your infrastructure.

Discover what Greinfort can show you about your industrial network.

Request a free Greinfort demo and explore its OT device discovery, inventory and visualisation capabilities in a 45-minute session.

No commitment and no prior installation required.

 

 

Frequently asked questions about OT asset inventory

What is an OT asset inventory?

It is a record of the devices that make up an operational technology infrastructure, including their technical characteristics, logical location and, where possible, information on their communications and activity. Keeping it up to date makes the industrial network easier to manage and monitor.

How can OT devices be discovered without active scanning?

Through passive monitoring of network traffic. This technique identifies devices and analyses communications without sending direct queries to the equipment. The visibility obtained depends on the traffic observed and the monitoring coverage.

What is the difference between an IT inventory and an OT inventory?

An OT inventory must take into account industrial protocols, legacy devices, dependencies between control systems and strict availability requirements. Discovery techniques must therefore be adapted to the operational characteristics of each infrastructure.

Which tools can automate industrial device inventory?

There are specialist solutions for OT asset discovery and management. Greinfort offers automated device inventory, technical characterisation, communications visualisation and wireless device detection through Air Watcher.

Can an OT inventory help with IEC 62443 and NIS2 compliance?

It can provide information on assets and their relationships that is useful for risk analysis, architecture reviews and evidence preparation. However, compliance depends on additional controls and on the requirements applicable to each organisation.

Sources and technical references

Did you like it?

Share it on social media!

LinkedIn
YouTube